NORMAS BS



BS 341-1:1991

Transportable gas container valves. Specification for industrial valves for working pressures up to and including 300 bar (REPLACED by BS EN 14189:2003), BS 341-3:2002), BS EN 849:1997), BS EN ISO 13340:2001), BS EN ISO 14246:2001), BS 341-4:2004).

 

 

BS 341-2:1963

Transportable Gas Container Valves. Valves with Taper Stems for Use with Breathing Apparatus. (REPLACED by BS 341-1:1991), BS EN 849:1997), BS EN ISO 12209-1:2001), BS EN ISO 12209-2:2001), BS EN ISO 12209-3:2001).

 

 

BS 341-3:2002

Transportable gas container valves. Valve outlet connections.

 

 

BS 341-4:2004

Transportable gas container valves. Pressure relief devices.

 

 

BS 759-1:1984

Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers. Specification for valves, mountings and fittings.

 

 

BS 1123-1:1990

Safety valves, gauges and fusible plugs for compressed air or inert gas installations – Code of practice for installation.

 

 

BS 1212-1:1990

Float operated valves – Specification for piston type float operated valves (copper alloy body) (excluding floats).

 

 

BS 1212-1:1990

Float operated valves – Specification for piston type float operated valves (copper alloy body) (excluding floats).

 

 

BS 1212-3:1990

Float operated valves – Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats).

 

 

BS 1212-4:1990

Float operated valves – Specification for compact type float operated valves for WC flushing cisterns (including floats).

 

 

BS 1552:2004

Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar.

 

 

BS 1570:1960

Flanged and but weld-welding end steel plug valves for the petroleum industry (excluding well -head and flow-line valves).

 

 

BS 1655:1976

Flanged automatic control valves for the process control industry (face to face dimensions).

 

 

BS 1735:1966

Flanged cast iron outside-screw-and-yoke wedge gate valve, class 125, sizes 1 1/3 in to 24 in, for the petroleum industry.

 

 

BS 1868:1975

Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries.

 

 

BS 1873:1975

Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries.

 

 

BS 1952:2000

Copper alloy valves for general purposes.

 

 

BS 1953:2000

Copper alloy check valves for general purposes.

 

 

BS 1963:1990

Specification for pressure operated relay valves for domestic, commercial and catering gas appliances.

 

 

BS 1968:1953

Specification for floats for ball valves (copper).

 

 

BS 2060:2000

Copper alloy screw down stop valves for general purposes.

 

 

BS 2080:1995

Specification for face to face, center to face, end to end and center to end dimensions of valves.

 

 

BS 2456:1990

Specification for floats (plastics) for float operated valves for cold water services.

 

 

BS 2879:1980

Specification for draining taps (screw-down pattern).

 

 

BS 2995:1966

Cast and forged steel wedge gate, globe, check and plug valve, screwed and socket welding, sizes 2 in and smaller, for the petroleum industry.

 

 

BS 3457:1973

Specification for materials for water tap and stop valve seat washers.

 

 

BS 3464:2000

Cast iron wedge and double disk gate valves for general purposes.

 

 

BS 3808:1964

Cast and forged steel flanged, screwed and socket welding wedge gate valves (compact design), sizes 2 in and smaller, for the petroleum industry.

 

 

BS 3948:1965

Cast iron parallel slide valves for general purposes.

 

 

BS 3952:1965

Cast iron butterfly valves for general purposes.

 

 

BS 3961:1965

Cast iron screw down stop valves and stop and check valves for general purposes.

 

 

BS 4062-1:1982

Valves for hydraulic fluid power systems – Methods for determining pressure differential/flow characteristics.

 

 

BS 4062-2:1990

Valves for hydraulic fluid power systems – Methods for determining performance.

 

 

BS 4090:1966

Cast iron check valves for general purposes.

 

 

BS 4133:1967

Flanged steel parallel slide valves for general purposes.

 

 

BS 4312:1968

Flanged steel screw down stop valves and check valves for general purposes.

 

 

BS 4460:1969

Steel ball valves for the petroleum industry.

 

 

BS 5041:1987

Fire hydrant systems equipment – Specification for landing valves for wet risers.

 

 

BS 5146 P1:1984

Steel valves for the petrochemical and allied industries.

 

 

BS 5150:1990

Withdrawn, Superseded Specification for cast iron gate valves.

 

 

BS 5151:1982

Withdrawn, Superseded – Specification for cast iron gate (parallel slide) valves for general purposes.

 

 

BS 5152:1989

Withdrawn, Superseded – Cast iron globe & globe stop and check valves.

 

 

BS 5153:1989

Withdrawn, Superseded – Cast iron check valves for general purposes.

 

 

BS 5154:1991

Specification for copper alloy globe, globe stop and check, check and gate valves.

 

 

BS 5155:1992

Specification for butterfly valves.

 

 

BS 5156:1990

Specification for diaphragm valves.

 

 

BS 5157:1989

Specification for steel gate (parallel slide) valves.

 

 

BS 5158:1989

Specification for cast iron plug valves.

 

 

BS 5159:1982

Cast iron and carbon steel ball valves for general purposes.

 

 

BS 5160:1989

Specification for steel globe valves, globe stop and check valves and lift type check valves.

 

 

BS 5163:1991

Specification for predominantly key-operated cast iron gate valves for waterworks purposes.

 

 

BS 5351:1990

Steel ball valves for petroleum, petrochemical and allied industries.

 

 

BS 5352:1990

Steel wedge gate, globe and check valves 50mm and small.

 

 

BS 5353:1989

Specification for steel plug valves.

 

 

BS 5417:1976

Testing of general purpose industrial valves.

 

 

BS 5418:1984

Specification for marking of general purpose industrial valves.

 

 

BS 5672:1991

Specification for designation of the direction of retation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on engines for reciprocating internal combustion engines.

 

 

BS 5793-4:1987

Industrial-process control valves – Specification for inspection and routine testing.

 

 

BS 5793-6:1986

Industrial-process control valves – Specification for mounting details for attachment of positioners to control valve actuators.

 

 

BS 5834-1:1985

Surface boxes, guards and underground chambers for gas and waterworks purposes – Specification for guards, including foundation units.

 

 

BS 5834-2:1983

Surface boxes, guards and underground chambers for gas and waterworks purposes – Specification for small surface boxes.

 

 

BS 5834-3:1985

Surface boxes, guards and underground chambers for gas and waterworks purposes – Specification for large surface boxes.

 

 

BS 5834-4:1989

Surface boxes, guards and underground chambers for gas and waterworks purposes – Specification for preformed chambers.

 

 

BS 5995:1980

Methods of test for electrohydraulic servo valves.

 

 

BS 6282-2:1982

Devices with moving parts for the prevention of contamination of water by backflow – Specification for check valves of nominal size up to and including DN 54.

 

 

BS 6282-3:1982

Devices with moving parts for the prevention of contamination of water by backflow – Specification for in-line anti-vacuum valves of nominal size up to and including DN 42.

 

 

BS 6282-4:1982

Devices with moving parts for the prevention of contamination of water by backflow – Specification for combined check and anti-vacuum valves of nominal size up to and including DN 42.

 

 

BS 6283-2:1991

Safety and control devices for use in hot water systems – Specifications for temperature relief valves for pressures from 1 bar to 10 bar.

 

 

BS 6283-4:1991

Safety and control devices for use in hot water systems – Specification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for supply pressures up to and including 12 bar.

 

 

BS 6494-4:1989

Hydraulic fluid power valve mounting surfaces – Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves.

 

 

BS 6675:1986

Specification for servicing valves (copper alloy) for water services.

 

 

BS 6683:1985

Guide to installation and use of valves.

 

 

BS 6697:1986

Methods of test for electrohydraulic proportional control valves.

 

 

BS 6755-2:1987

Testing of valves – Specification for fire type-testing requirements.

 

 

BS 6759-1:1995

Safety valves – Part 1. Specification for safety valves for steam and hot water.

 

 

BS 6759-2:1997

Safety valves – Part 2. Safety valves for compressed air or inert gas.

 

 

BS 6759-3:1995

Safety valves – Part 3. Specification for safety valves for process fluids.

 

 

BS 6821:1988

Methods for aerodynamic testing of dampers and valves.

 

 

BS 7296-1:1990

Cavities for hydraulic fluid power cartridge valves – specification for two-port slip-in valves.

 

 

BS 7350:1990

Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems.

 

 

BS 7389-1:1990

Pneumatic fluid power valve mounting surfaces – specification for five-port directional control valves (without electrical motor).

 

 

BS 7438:1991

Specification steel and copper alloy waffer check valves, single disk, spring-loaded type.

 

 

BS EN 488:2003

District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.

 

 

BS EN 558-1:1996

Industrial values face to face and center to face dimensions of metal valves for use in flanged pipe systems. Part 1 PN designated valves.

 

 

BS EN 558-2:1996

Industrial valves face to face and center to face dimensions of metal valves for use in flanged piping systems. Part 2 class-designated valves.

 

 

BS EN 561:2002

Gas welding equipment – Quick-action coupling with shut-off valves for welding, cutting and allied processes.

 

 

BS EN 736-1:1995

Valves – Terminology – Definition of types of valves.

 

 

BS EN 736-2:1997

Valves – Terminology – Definition of components of valves.

 

 

BS EN 816:1997

Sanitary tapware – Automatic shut-off valves PN 10.

 

 

BS EN 917:1997

Plastics piping systems – Thermoplastics valves – Test methods for resistance to internal pressure and leaktightness.

 

 

BS EN 1092-2:1997

Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Cast iron flanges.

 

 

BS EN 1112:1997

Shower outlets for (PN 10) sanitary tapware.

 

 

BS EN 1680:1997

Plastics piping systems – Valves for polyethylene (PE) piping systems – Test method for leaktightness under and after bending applied to the operating mechanism.

 

 

BS EN 1704:1997

Plastics piping systems – Thermoplastics valves – Test method for the integrity of a valve after temperature cycling under bending.

 

 

BS EN 1705:1997

Plastics piping systems – Thermoplastics valves – Test method for the integrity of a valve after an external blow.

 

 

BS EN 12119:1997

Plastics piping systems – Polyethylene (PE) valves – Test method for resistance to thermal cycling.

 

 

BS EN 14141:2003

Valves for natural gas transportation in pipelines – Performance requirements and tests.

 

 

BS EN 14189:2003

Transportable gas cylinders. Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders. Partially replaces BS 341-1:1991.

 

 

BS EN 28233:1992

Thermoplastics valves – Torque – Test method.

 

 

BS EN 28659:1992

Thermoplastics valves – Fatigue strength – Test method.

 

 

BS EN 60534-1:1989

Industrial-process control valves – Industrial-process control valves – Control valve terminology and general considerations.

 

 

BS EN 60534-2-1:1999

Industrial-process control valves – Flow capacity – Flow capacity – Sizing equations for fluid flow under installed conditions.

 

 

BS EN 60534-2-3:1998

Industrial-process control valves – Flow capacity – Test procedures.

 

 

BS EN 60534-2-5:2003

Industrial-process control valves – Flow capacity – Sizing equations for fluid flow through multistage control valves with interstage recovery.

 

 

BS EN 60534-3-1:2000

Industrial-process control valves – Dimensions – Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves.

 

 

BS EN 60534-3-2:2001

Industrial-process control valves – Dimensions – Face-to-face dimensions for rotary control valves except butterfly valves.

 

 

BS EN 60534-3-3:1998

Industrial-process control valves – Dimensions – End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves.

 

 

BS EN 60534-5:2004

Industrial-process control valves – Marking.

 

 

BS EN 60534-6-1:1998

Industrial-process control valves – Mounting details for attachment of positioners to control valves – Positioner mounting on linear actuators.

 

 

BS EN 60534-6-2:2001

Industrial-process control valves – Mounting details for attachment of positioners to control valves – Positioner mounting on rotary actuators.

 

 

BS EN 60534-8-1:2001

Industrial-process control valves – Noise considerations – Laboratory measurement of noise generated by aerodynamic flow through control valves.

 

 

BS EN 60534-8-2:1991

Industrial-process control valves – Noise considerations – Laboratory measurement of noise generated by hydrodynamic flow through control valves.

 

 

BS EN 60534-8-3:2000

Industrial-process control valves – Noise considerations – Control valve aerodynamic noise prediction method.

 

 

BS EN 60534-8-4:1994

Industrial-process control valves – Noise considerations – Prediction of noise generated by hydrodynamic flow.

 

 


BS EN 60730-2-8:2002

Specification for automatic electrical controls for household and similar use – Particular requirements – Particular requirements for electrically operated water valves, including mechanical requirements.

 

 

BS EN ISO 5210:1996

Industrial valves – Multi-turn valve actuator attachments.

 

 

BS ISO 4401:1996

Hydraulic fluid power – Four-port directional control valves – Mounting surfaces.

 

 

BS ISO 6263:1997

Hydraulic fluid power – Compensated flow-control valves – Mounting surfaces.